DANA 60/70/80 PINION FLANGE
D6 3660
Pinion Flange to adapt a Dana 60/70/80 axle to a 1410/1480 Driveshaft
Dana 60
Companion Flange - Splined Bore
1410 series, Ø1.276x29 spline, Ø1.875 hub diameter
4 Drilled Holes on 4.750BC, Ø3.750-F pilot
1410 series, Ø1.276x29 spline, Ø1.875 hub diameter
4 Drilled Holes on 4.750BC, Ø3.750-F pilot
U-Joint Series | 1410/1480/1550 | |
Spline Major Diameter | D | 1.276 |
Spline Count | 29.000 | |
Spline Type | Involute Spline | |
Pilot Bore Diameter | C | 3.750-F |
Bolt Circle Diameter | B | 4.750 |
Bolt Circle Hole Diameter (D = Drilled, T = Tapped) |
.506 D | |
Number of Holes | 4.000 | |
Brake Pilot Diameter | 0.000 | |
Ground Hub Diameter | E | 1.875 |
Length Thru Bore | F | 1.500 |
Flange Face to End of Hub | G | 2.250 |