DRIVESHAFT ADAPTERS, 5 TON

Axletech Cross Cut To 5 Ton Driveshaft Large and Small
These adapters will allow you to run the round flange style 5 Ton Driveshaft with your cross cut pattern Axletech Pinion Yoke. U-Joint sizes that work are 1610 and 1710, reference photo below to make sure this flange will work with your axle, does not inlcude bolts

5 Ton Driveshaft to 1410/1480/1550 (2.5 Ton Driveshaft)
These adapters will allow you to run larger driveshaft on 2.5 Ton Axles or a smaller driveshaft on the 5 Ton Axles, includes bolt kit

5 Ton U-Joint Flange Yoke 1610 Driveshaft
These will bolt up to a 1610 U-Joint, bolt circle is 7.25".

5 Ton U-Joint Flange Yoke 1710 Driveshaft
These will bolt up to a 1710 U-Joint, this is a new part, does not include any bolts

5 Ton 7C LWT U-Joint Flange Yoke Driveshaft
These will bolt up to 7C LWT U-Joint, does not include any bolts