1410/1480 OUTPUT FLANGES, NP205
DR 3665
32 Spline
This 1410 / 1480 series companion flange is designed to fit the 32 spline front and rear output shafts of New Process 205, 203, and Atlas transfer cases. The flange has the required chamfer at the base of the hub to clear the bearing cage on Atlas transfer cases.
This flange is most commonly used to mount a Rockwell 2-1/2 Ton Deuce and a Half type driveshaft to NP205 and Atlas transfer cases.
Companion Flange - Splined Bore
1410 series, Ø1.401x32 spline, Ø2.125 hub diameter
4 Drilled Holes on 4.750BC, Ø3.750-F pilot
30 Spline 14 Bolt Companion Flange
This 1410/1480 series companion flange is designed to fit the 30 spline front output shaft common on GM NP203 and NP205 transfer cases in the 70s and 80s. These flanges use a larger hub diameter than the stock yokes and 3R CV flanges used originally, so a different seal will likely be needed. For cases with a 3.061" seal bore, use TIM-473468, NAT-473468, or CR-21211.
Companion Flange - Splined Bore
1410 series, Ø1.326x30 spline, Ø2.125 hub diameter
4 Drilled Holes on 4.750BC, Ø3.750-F pilot