Replacement Valve for the Scott Shocks Dual Hose fill system
Thumb Nut Style
These fill valves are a no-air-loss chuck that uses knurled thumb nuts on the top and bottom and the copper washer has been replaced with a synthetic material, lowering the torque specs needed to get an airtight seal on the schrader valve. We left wrench flats on the bottom nut in case extra torque is desired.Â
The two knurled thumb nuts attach to the valve stem and depress the valve core pin in two separate actions. This allows you to close the shock under pressure, ensuring no N2 loss when you remove the Shock Chuck
Note:Â Do not twist the body while attaching or removing from valve stem.
Details for Thumb Nut &Â T-Handle:
- Stainless Steel
- 1/8" NPT Male Thread
- Used for Nitrogen Shocks and ORI Struts
- Rated for 1000 psi
- Rebuildable
- Does not need wrench
-
.305-32 thread size
Details for Budget:
- Brass
- 1/8" NPT Female Thread
- Used for Nitrogen Shocks and ORI Struts
- Rated for 3000 psi
- .305-32 thread size
Full Nitrogen Fill Kit Available HERE