2.5 TON HIGH STEER ARMS

2.5 Ton High Steer Arms, made from T1 steel, with a built in double shear tube to help tie into the stock steer arm, sharing the load of the Steering Ram. Heim Joints can be run above or below the arm by shortening the tube.

High Steer arms are sold with the intention to run the Heim Joint above the Steer Arm, if you wish to run the Heim below the Steering Arm, the tube will need to be modified once received or we can modify for you, if Heim Joint width is specified before ordering. 

These arms also work great in conjunction with our high steer ram mount  

Sold in pairs, 1 pair of arms will be enough for 1 axle 

Bolts required:

• 8x 9/16"x2" Grade 8 Bolts
• 8x 9/16" Grade 8 Lock Washers

Kit Includes:

• 1x LH Arm
• 1x RH Arm
• 2 Taper Elimination Cones for the stock tie rod hole

NOTE

when arms are ordered unwelded we will send 2 full length tubes with the kit
-they will work as is with the heim above the arm, if you mount the heim below the arm the tubes will need to be trimmed down to whatever width of heim you are using 
-if you comment in the notes upon checkout the width of heim you with to mount below the arm and are willing to wait an extra 2-3 days for processing we will machine the tubes to go with your kit to the correct length