FRONT HUB FLIP KIT, 2.5 TON
25 5052 K
Kit includes:
- 24x Anti Vibration Washers
- 24x 3/8" x 1" Grade 8 Bolts
When flipping the hubs on a steer 2.5 Ton Axle to run a narrow track width, you will need to remove the factory Spindle Studs, then replace them with this kit that allows the backside of the Wheel Studs to clear the Spindle bolt heads. Keep in mind some grinding on the backside of the Wheel Studs will be required. This kit will make sure the amount of material needed to be removed will be an absolute minimum.