Select One Time for a limited 30 day hosted access or choose a Monthly Subscription Plan in the options below

One Time Purchase

Billed once for 30 day hosted access to the Manual. Access is granted immediately once Subscription has been paid for, you will need an account to access the Manual. No Cancellations are granted with the One Time Purchase option.

Monthly Subscription

Billed once Monthly on the same date of the month as your purchase date. Access is granted immediately once Subscription has been paid for, you will need an account to access the Manual.

The Monthly Subscription requires at minimum 2 monthly billing cycles in order to receive the product at reduced price. By clicking add to cart you agree to these terms.

**Monthly Subscription Cancellation**
You may cancel this subscription any time after your second subscription payment has been received, before your next bill date to avoid another charge. Subscription is available for the entire month, even if cancelled before next bill date. Once cancelled you will not be billed on your next bill date and you will lose access on the date of renewal.

** PLEASE NOTE THIS IS AN ONLINE COPY ONLY, YOU ARE NOT ABLE TO DOWNLOAD THE MANUAL OR PRINT IT OFF**

Maintenance Manuals for all our Axles and T-600 Transfer Case

Breathing line kit for your Rockwell Axles, will fit most Axles.

Kit includes enough line and fittings for one Axle: 

• 25 feet of 1/4" Air Line
• 1/8" NPT Compression Fitting
• Nylon tubing is flexible and durable but will not collapse like rubber hose

Replacement Knuckle/Spindle Assembly for Axletech 4000

Comes as one piece

Item #16 in the Parts Breakdown

Axletech 4000 Steering Arm Dowel Pins will work for both stock and aftermarket steering arms. 

Choose between Press Fit for a tighter tolerance, or Drop in Fit making it easier to work on in the future. 

*Sold in Pairs

2 Piece Flange Wheel Nut, 33MM Hex

Item #28 on the Parts Breakdown

This kit includes:

• (1x) 1.0 MM Shim
• (1x) 0.5 MM Shim
• (1x) 0.3 MM Shim
• (1x) 0.2 MM Shim

Upper is Items #11, 12, 13, 14 in the Parts Breakdown

Lower is Items #5, 6, 7, 8 in the Parts Breakdown

Sold Each

Item #10 on the Parts Breakdown

Axletech 4000 Axleshaft U-Joint

**PLEASE CHECK YOUR CAP DIAMETER BEFORE ORDERING**

Most Wide Axletech and the long side of the Narrow Axletech Axles use a U-Joint with a cap diameter of 1.38”

Some narrow axles have a smaller U-joint on the short side shaft it’s cap diameter is 1.34” please make sure to check this and order the correct size. Iif you have any questions, submit a quote or give us a call and we will do our best to help you out.

Axletech 4000 Drain Plug

Pigtail sensor, will work on AT 4000's and T-600 Momentary Sensors

Replacement pigtails for Axletech and T-600 Control Boxes

5 Ton U-Joint Driveshaft Adapter work with 1610 U-Joint

Cross Cut To 5 Ton Driveshaft
These adapters will allow you to run the round flange style 5 Ton Driveshaft with your cross cut pattern Axletech Pinion Yoke. U-Joint sizes that work are 1610 and 1710

Cross Cut To 1410/1480/1550
These Adapters will allow you to run the common 4 bolt style u-joint adapter with the cross cut pattern Axletech Pinion Yoke. U-Joint Sizes that work are 1410, 1480, 1550
**Contact us for Quote**

Wide To 1410/1480/1550
These Adapters will allow you to run the common 4 bolt style u-joint adapter with the oval wide pattern Axletech Pinion Yoke. U-Joint Sizes that work are 1410, 1480, 1550

Does NOT include 4 bolt or round flange u-joint adapters 

Axletech Hub Assembly, includes:

• Hub
• Outer Hub Face
• Hub Bearings
• Planetary Gears

Does NOT Include

• Disc Brake Rotor
• Wheels Studs
• Lug Nuts
• Spindle

 Reman Part

20” Diameter x10” Wide 

10x 335mm Bolt Pattern with a 11.25” Hub Pilot, 

Dot Approved Double Internal Bead Lock 

Steel Wheels Weight 165lb 

Can Be Mounted On 2.5 Ton or Smaller Axles with an Adaptor Plate 

5 Ton Adaptor Plates are not available 

 Adapter Plates


Hutchison Double Internal Locking Wheels, unlike typical Beadlock Wheels that clamp the Tire to each bead with a separate ring, the Hutchison style Wheels, use a 2 piece Wheel along with a Tire insert. The Tire insert fits inside the Tire, up against the Tire bead. Once fit into the Wheel, the 2 halves of the Wheel are pulled together, essentially crushing the Tire against the Wheel.

 **Do Not come with Beadlock Inserts, we do carry stock on them you can find them Here**

***Please note Rims are subject to availability, shipping will be charged separately, please contact us for availability and a shipping quote***

 ** Parts are refurbished, meaning they may show slight signs of wear, but will work exactly as intended, if you prefer brand new please contact us for options **

20” Diameter x10” Wide 

10x 335mm Bolt Pattern with a 11.25” Hub Pilot, 

Dot Approved Double Internal Bead Lock 

Aluminum Wheels Weight 65lb 

Can Be Mounted On 2.5 Ton or Smaller Axles with an Adaptor Plate 

5 Ton Adaptor Plates are not available 

Torque Spec for Hutchinson Beadlock Mounting Bolts:

PN: WI 1233-C
Spec: 200 (+/- 10) ft-lbs

PN: WO 1199-A
Spec: 200 (+/- 10) ft-lbs

PN: WO 1184-C
Spec: 200 (+/- 10) ft-lbs

For any other questions Hutchinson can be contacted directly at 609-858-5672

Wheel Part Number can be found on either Outer Ring or the Inner Bell of all Hutchinson Wheels, please see photo with Part Number Circled in the images below.

 
Hutchison Double Internal Locking Wheels, unlike typical Beadlock Wheels that clamp the Tire to each bead with a separate ring, the Hutchison style Wheels, use a 2 piece Wheel along with a Tire insert. The Tire insert fits inside the Tire, up against the Tire bead. Once fit into the Wheel, the 2 halves of the Wheel are pulled together, essentially crushing the Tire against the Wheel.

 **Do Not come with Beadlock Inserts, we do carry stock on them you can find them Here**

***Please note Rims are subject to availability, shipping will be charged separately, please contact us for availability and a shipping quote***

 ** Parts are refurbished, meaning they may show slight signs of wear, but will work exactly as intended, if you prefer brand new please contact us for options **

Contact us if you would like a 6.84 Chunk 

New Take Outs, Locker NOT included