PN: 25 2201

EMF's Rockwell 2.5 Ton Pinion Brake Kit contains everything you need to set up your Rockwell Pinion Braking System. Much higher quality than most brake kits on the market, will not fade, distort or crack under hard use. Rotor mounts on the back side of the 2.5 Ton flange, so it can be used on the driveline side of the axle or the empty yoke side.

Standard Kit Includes: PN 25 2201

• 10" Non-Vented Rotor, will not plug with mud burning out brake pads
• Wilwood Caliper
• Poly Matrix Wilwood Brake Pads
• 1/4" Pinion Brake Mount Bracket 

Pinion Brake Kit with Extras Includes: PN 25 2201 E

• 10" Non-Vented Rotor, will not plug with mud burning out brake pads
  
• 2x Wilwood Calipers
• 2x Poly Matrix Wilwood Brake Pads
• 2x 1/4" Pinion Brake Mount Bracket 
• 2x Pinion Brake, 2.5 Ton Bolt Kit 

Bolts Required (Option to purchase bolt kit) PN: 25 2251 K:

• (3x) 1/2"x1-3/4" NC Bolt Gr 8
• (4x) 1/2"x2-1/4" NC Gr 8 Bolt
• (2x) 3/8"x1-1/2" NC Bolt Gr 8
• (8x) 1/2" Flat Washer
  
• (4x) 3/8" Flat Washer
• (2x) 3/8" NC Stover Nut
• (3x) 1/2" Lock Washer
• (4x) 1/2" NC Stover Nut

10" diameter made from solid billet steel will not warp like plasma cut rotors, or heat check and fail like cast rotors. No vent holes prevent mud and sand from building up between the pad and rotor causing premature wear, the thick steel rotor is very resilient to damage if it comes in contact with an obstacle. Also because they are 3/4” thick solid steel, this means it is possible to machine them multiple times and bring them right back to new!

These are premium brake kits with top of the line parts, designed specifically for those who desire the best and safest brake Kit on the market!

PN: 5T 2201

EMF's Rockwell 5 Ton Pinion Brake Kit contains everything you need to set up your Rockwell Pinion Braking System.

• Wcr Non-Vented Rotor
• Wilwood Caliper
• Wilwood Brake Pads
• Pinion Mounting Bracket and Grade 8 Hardware. with the ability to choose what side to run it on, there are two different Mount Brackets and Bolt Kits available

12" diameter made from solid billet steel will not warp like plasma cut rotors, or heat check and fail like cast rotors. No vent holes prevent mud and sand from building up between the pad and rotor causing premature wear, the thick steel rotor is very resilient to damage if it comes in contact with an obstacle. Also because they are 3/4” thick solid steel, this means it is possible to machine them multiple times and bring them right back to new!

These are premium brake kits with top of the line parts, designed specifically for those who desire the best and safest brake Kit on the market!

PN: F1 2201

F106 Pinion Brake Kit contains everything you need to set up your F106 Rockwell Pinion Braking System.

• Non-Vented Rotor
• SCS Pinion Mount Flange
• Wilwood Caliper
• Wilwood Brake Pads
• 1/4" Pinion Bracket 

Bolts Required (Option to purchase bolt kit) PN: F1 2253:

• (8x) 3/8"X1-1/2" NC Socket Head Bolt
• (8x) 3/8" NL Washer
• (2x) 3/8" NC Stover Nut
• (2x) 3/8"X2-1/2" NC Bolt Gr 8
  
• (3x) 7/16"X2" NC Bolt Gr 8
• (3x) 7/16" Flat Washer

12" diameter made from solid billet steel will not warp like plasma cut rotors, or heat check and fail like cast rotors. No vent holes prevent mud and sand from building up between the pad and rotor causing premature wear, the thick steel rotor is very resilient to damage if it comes in contact with an obstacle. Also because they are 3/4” thick solid steel, this means it is possible to machine them multiple times and bring them right back to new!

These are premium brake kits with top of the line parts, designed specifically for those who desire the best and safest brake Kit on the market!

PN: MR 2201

WCR's Meritor 611 Pinion Brake Kit contains everything you need to set up your Meritor Pinion Braking System.

• 12" WCR Non-Vented Rotor
• Pinion Mounted Flange
• Wilwood Caliper
• Wilwood Brake Pads
• Pinion Mounting Bracket and Grade 8 Hardware. with the ability to choose what side to run it on, there are two different Mount Brackets and Bolt Kits available

12" diameter made from solid billet steel will not warp like plasma cut rotors, or heat check and fail like cast rotors. No vent holes prevent mud and sand from building up between the pad and rotor causing premature wear, the thick steel rotor is very resilient to damage if it comes in contact with an obstacle. Also because they are 3/4” thick solid steel, this means it is possible to machine them multiple times and bring them right back to new!

These are premium brake kits with top of the line parts, designed specifically for those who desire the best and safest brake Kit on the market!

**Please note circled areas pictured, may need to be clearanced for proper fitment on back of Driveshaft Adapter 4 Bolt Flange.